Eagle FISH-FINDING AND DEPTH SOUNDING SONARS - ADDITIONNAL Spécifications télécharger pdf (Page 47)

4. Press ← to

SHALLOW ALARM ENABLED|ENT|EXIT.

5. To turn off the alarm, press

ALARM|ENT|ENT|EXIT.

To switch to a different depth setting, open the Sonar Alarms menu and

repeat the instructions in step 3 above.

To adjust and turn on the deep alarm:

1. Press ALARM.

2. Press ↓ to

DEEP ALARM ENABLED|→ to Deep Alarm DEPTH|ENT.

3. Press ↑ or ↓ to change the first number, then press → to move the

cursor to the next number and repeat until the depth is correct, then

press

ENT.

4. Press ← to

DEEP ALARM ENABLED|ENT|EXIT.

5. To turn off the alarm, press

ALARM|↓ to DEEP ALARM

ENABLED|ENT|EXIT.

To switch to a different depth setting, open the Sonar Alarms menu and

repeat the instructions in step 3 above.

Zone Alarm

The zone alarm is triggered when any echo passes inside the zone

alarm bar, shown on the right side of the screen.

To adjust and turn on the zone alarm:

1. Press ALARM.

2. Press ↓ to

ZONE ALARM ENABLED|→ to ADJUST ZONE|ENT.

Sonar Alarms menu (left) with Adjust Zone command selected.

Adjust Zone Alarm selection box, with Upper selected (right).

3. To set the upper boundary for the Zone Alarm, use ← or→ to select

UPPER, then press ↑ or ↓ to move the top of the bar to the desired depth.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 83 84

Pas de commentaire

Eagle FISH-FINDING AND DEPTH SOUNDING SONARS - ADDITIONNAL Spécifications Page 47