Eagle 320 Spécifications télécharger pdf (Page 23)

Attach motor mounting bracket to transducer.

2. Slide the adjustable strap supplied with the TMB-S through the slot

in the transducer bracket and wrap it around the trolling motor. Posi-

tion the transducer to aim straight down when the motor is in the wa-

ter. Tighten the strap securely.

3. Route the transducer cable alongside the trolling motor shaft. Use

plastic ties (not included) to attach the transducer cable to the trolling

motor shaft. Make sure there is enough slack in the cable for the motor

to turn freely. Route the cable to the sonar unit and the transducer is

ready for use.

Transducer mounted on trolling motor, side view.

Transducer Orientation And Fish Arches

If you do not get good fish arches on your display, it could be because

the transducer is not parallel with the ground when the boat is at rest

in the water or at slow trolling speeds.

Bolt

Internal tooth washer

Nut

Flat washer

TMB-S bracket

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 103 104

Pas de commentaire

Eagle 320 Spécifications Page 23